+86-514-87737188  87731818 
Add:Yangshou Industrial
Park,Hangjiang District,
Yanzhou Ctiy.
  • Name:WSG25 precision plastic composite welded pipe mill
  • Clicks:
  • Updated:2012-09-28 22:09:18
  • 【Print】【Close】
  • More
  • Manufacturing capacity
  • Equipment components
  • Detailed technical
  • Schematic diagram

1 The equipment for the manufacture of production Φ10 ~ Φ28mm δ0.4 to 1.2mm precision plastic composite pipe and special equipment for the corresponding composite square tube. Cut off saw only the composition of the device from the the discharge tray to cut to length, within the scope of the proper diameter and appropriate wall thickness, the the pipe speed can be adjusted accordingly.
2. Applicable material:
(1) A: inner tube hot-rolled or cold-rolled strip steel B: the outer tube. Plastics
Plastic outer tube (2) low carbon steel tube Material: A. B.
(3) strip thickness of tube: 0.4 ~~ 1.2mm, the thickness of the plastic outer tube: normal injection molding thickness
3. Processing the composite pipe size range:
(1) outer diameter: Φ10 ~ Φ28mm
(2) Wall thickness tube: 0.4 ~~ 1.2mm outer tube wall thickness: the thickness of the normal injection
(3) Length: 4 ~ 9M
A: steel pipe production process:
Steel strip, both shear butt (user-owned) power leveling → ​​→ storage silos → forming rolling → ​​high-frequency welding → ​​remove welds outer burr → cooling → ​​given raw (strip steel roll) → discharge → Trail → enter the injection composite units
B: composite pipe production process: raw material (plastic) → injection molding compound machine → cut to length cut → drop tube
5 Rolling speed: 4 ~ 20M/min.
Power: (for reference)
(a) Equipment Motor: 3KW 37KW 4KW 7.5KW = 51.5KW
(b) high-frequency equipment: 100KW
(c) injection molding machine

Home  |  Introduction  |  Products | News  |  Feeback  |  Contact us
Copyright 2012 Yangzhou Weiguang Metal Co.,LTD. All Rights Reserved
苏ICP备09050191号  Design by:www.yzsdw.com